Pallet Wood Night Stand
| February 2021 |

This pair of 18" x 22" x 24" night stands are made entirely from old wooden pallets. The pallets were cut using a jigsaw and sawzaw and then milled to a standard thickness of 5/16" on a planer and joiner. The top has a chevron design showcasing the different types of wood used in the pallets and is approximately 1.5" thick requiring a total of 5 pieces of pallet wood each that were glued together. The bottom slats are made with slightly wider pieces of pallet wood. 

​

The legs are made from 1" tube steel and welded together using a MIG welder and spray painted black. The leg frames are not welded to the front metal trim and were designed to lay flat for easier storage and transporation. 

​

To provide additional functionality, a USB Type A port and Type C port with 45W of Power Delivery were placed on the front. These ports are connected to a power strip mounted under the table. An area under the top was also routed out using a plunge router for a wireless charger. This allows you to charge any QI enabled device by simply placing the device on the night stand.